FAQ |
|||||
|
CLICK TO SEE A TYPICAL WIRING DIAGRAM
Yes they compliment eachother. The NoNag will blank the screen when the discalimer pops up. You will never see the disclaimer
screen because the NoNag instructs the NavBox to swith modes temporarily. The NoNag is not required for installation of the
NavBox.
9) How do you power the xbox?
The xbox is powered by an inverter that can supply 150 watts of continuous power. These are fairly inexpensive. However
some inverter designs are electrically noisy and you may see artifacts of this noise on your screen. A noise filter is recommended
on installations. In some cases a ground loop isolator may be needed on audio lines. I cannot recommend specific brands
of inverters but I have had success with Pyle and Vector brands. Buy an inverter from a vendor that will accept returns in
case you want to switch brands.
10) I dont have any space under my passenger seat for an Xbox. Can I mount my Xbox in the trunk?
Yes. In this case a wireless RF joystick may be your best bet. A modded Xbox will be able to play DVD's with the joystick
alone and the IR remote control (which won't work anyway) will not be needed. Modding your Xbox will broaden your install
options.
11) Can I use the HomeLink buttons to turn on the XBox? Can I use the Homelink buttons to switch video modes?
Yes, as you can see in the G35 video it can be done. Some additional hardware (remote control unit and relays) will
be necessary to perform this as well as running a wire to the power button of your Xbox. It is a nice weekend project if you
have the experience to perform these additional modifications.
12) What are the 3 RCA connectors on the NavBox?
There is one auxilliary composite video output so you may feed extra headrest or rear passenger monitors. The other two
RCA jacks are the audio feed from the xbox. The NavBox does not process the sound at all. It is merely a pass-thru connection.
|
1) How hard is the NoNag to install.
The NoNag requires the connection of three wires (four wires on the
FX). One of those wires must be soldered to a point on the user interface. The other wirea are power and ground and can be
spliced into the cigarette lighter circuit.
2) Will the NoNag work in any car?
NoNag devices are currently installed in Murano's and Infinit FX's. I have
not performed any installation in a G35 yet but I am working on it. If there is anyone out there who wants to be a candidate
for testing in the NYC area please let me know.
3) How does the NoNag work.
The NoNag will automatically press enter for you when the disclaimer pops
up on the display. Its that simple. On the Infiniti FX the NoNag also monitors the reverse line for those with the TECH package.
This ensures that the disclaimer is processed correctly.
4) Will the NoNag work with the NavBox?
Yes they compliment eachother. The NoNag will blank the screen when the
discalimer pops up. You will never see the disclaimer screen because the NoNag instructs the NavBox to swith modes temporarily.
The NavBox is not required for installation of thr NoNag.
|
|||||||||